TEL: (212) 752-2020
FAX: (212) 821 0025
733 Third Ave. FL 20
New York, NY
10017 USA

SAFETY DATA SHEET

Version 1.0 Creation Date 01/15/2015

1. PRODUCT AND COMPANY IDENTIFICATION

1.1 Product identifiers

Product name

:

Diisodecyl phthalate

Product Number

:

80135

CAS-No.

:

26761-40-0

1.2 Relevant identified uses of the substance or mixture and uses advised against

Identified uses

: Laboratory chemicals, Manufacture of substances

1.3 Details of the supplier of the safety data sheet

Distributor

: Continental Industries Group, Inc.

 

733

Third Avenue Fl. 20

 

Tel:

212-752-2020

 

New York, NY 10017

 

USA

1.4 Emergency telephone number

Chemtel Phone #

: 1-800-255-3924

International Phone #

: +01-813-248-0585

2. HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture

GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)

Acute aquatic toxicity (Category 1), H400 Chronic aquatic toxicity (Category 1), H410

For the full text of the H-Statements mentioned in this Section, see Section 16.

2.2 GHS Label elements, including precautionary statements

Pictogram

Signal word

Warning

Hazard statement(s)

 

H410

Very toxic to aquatic life with long lasting effects.

Precautionary statement(s)

 

P273

Avoid release to the environment.

P391

Collect spillage.

P501

Dispose of contents/ container to an approved waste disposal plant.

2.3 Hazards not otherwise classified (HNOC) or not covered by GHS - none

3. COMPOSITION/INFORMATION ON INGREDIENTS

3.1 Substances

Synonyms

: DIDP

Formula

: C28H46O4

Molecular Weight

:

446.66 g/mol

CAS-No.

: 26761-40-0

EC-No.

:

247-977-1

No ingredients are hazardous according to OSHA criteria.

No components need to be disclosed according to the applicable regulations.

For the full text of the H-Statements mentioned in this Section, see Section 16.

4. FIRST AID MEASURES

4.1 Description of first aid measures

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

In case of skin contact

Wash off with soap and plenty of water. Consult a physician.

In case of eye contact

Flush eyes with water as a precaution.

If swallowed

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

4.2 Most important symptoms and effects, both acute and delayed

The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11

4.3 Indication of any immediate medical attention and special treatment needed no data available

5. FIREFIGHTING MEASURES

5.1 Extinguishing media

Suitable extinguishing media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

5.2 Special hazards arising from the substance or mixture

Carbon oxides

5.3 Advice for firefighters

Wear self contained breathing apparatus for fire fighting if necessary.

5.4

Further information
no data available

6. ACCIDENTAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures

Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. For personal protection see section 8.

6.2 Environmental precautions

Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

6.3 Methods and materials for containment and cleaning up

Keep in suitable, closed containers for disposal.

6.4 Reference to other sections

For disposal see section 13.

7. HANDLING AND STORAGE

7.1 Precautions for safe handling

For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities

Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.

7.3 Specific end use(s)

Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1 Control parameters

Components with workplace control parameters

Contains no substances with occupational exposure limit values.

8.2 Exposure controls

Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Personal protective equipment

Eye/face protection

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

Full contact

Material: Nitrile rubber

Minimum layer thickness: 0.11 mm Break through time: 480 min

Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)

Splash contact Material: Nitrile rubber

Minimum layer thickness: 0.11 mm Break through time: 480 min

Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)

data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374

If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.

Body Protection

impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Respiratory protection

Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi- purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Control of environmental exposure

Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

9. PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on basic physical and chemical properties

a)

Appearance

Form: liquid

b)

Odour

no data available

c)

Odour Threshold

no data available

d)

pH

no data available

e)

Melting point/freezing

no data available

 

point

 

f)

Initial boiling point and

no data available

 

boiling range

 

g)

Flash point

275.00 °C (527.00 °F) - closed cup

h)

Evapouration rate

no data available

i)

Flammability (solid, gas)

no data available

j)

Upper/lower

no data available

 

flammability or

 

 

explosive limits

 

k)

Vapour pressure

no data available

l)

Vapour density

no data available

m)

Relative density

0.965 g/mL at 20 °C (68 °F)

n)

Water solubility

no data available

o)

Partition coefficient: n-

no data available

 

octanol/water

 

p)

Auto-ignition

no data available

 

temperature

 

q)

Decomposition

no data available

 

temperature

 

r)

Viscosity

no data available

s)

Explosive properties

no data available

t)

Oxidizing properties

no data available

9.2 Other safety information no data available

10. STABILITY AND REACTIVITY

10.1 Reactivity

no data available

10.2 Chemical stability

Stable under recommended storage conditions.

10.3 Possibility of hazardous reactions no data available

10.4 Conditions to avoid no data available

10.5 Incompatible materials

Strong oxidizing agents

10.6 Hazardous decomposition products

Other decomposition products - no data available In the event of fire: see section 5

11. TOXICOLOGICAL INFORMATION

11.1 Information on toxicological effects

Acute toxicity

LD50 Oral - rat - 64,000 mg/kg Inhalation: no data available

LD50 Dermal - rabbit - > 3,160 mg/kg no data available

Skin corrosion/irritation no data available

Serious eye damage/eye irritation no data available

Respiratory or skin sensitisation no data available

Germ cell mutagenicity no data available

Carcinogenicity

IARC:

No component of this product present at levels greater than or equal to 0.1% is identified as

 

probable, possible or confirmed human carcinogen by IARC.

ACGIH:

No component of this product present at levels greater than or equal to 0.1% is identified as a

 

carcinogen or potential carcinogen by ACGIH.

NTP:

No component of this product present at levels greater than or equal to 0.1% is identified as a

 

known or anticipated carcinogen by NTP.

OSHA:

No component of this product present at levels greater than or equal to 0.1% is identified as a

 

carcinogen or potential carcinogen by OSHA.

Reproductive toxicity no data available

no data available

Developmental Toxicity - rat - Oral

Effects on Embryo or Fetus: Fetotoxicity (except death, e.g., stunted fetus). Specific Developmental Abnormalities: Musculoskeletal system.

Specific target organ toxicity - single exposure no data available

Specific target organ toxicity - repeated exposure no data available

Aspiration hazard no data available

Additional Information

RTECS: TI1270000

Acute symptoms of overexposure include:, Erythema

12. ECOLOGICAL INFORMATION

12.1 Toxicity

Toxicity to fish

LC50 - Oncorhynchus mykiss (rainbow trout) - > 0.62 mg/l - 96 h

Toxicity to daphnia and EC50 - Daphnia magna (Water flea) - > 0.02 mg/l - 48 h other aquatic

invertebrates

12.2 Persistence and degradability no data available

12.3 Bioaccumulative potential no data available

12.4 Mobility in soil no data available

12.5 Results of PBT and vPvB assessment

PBT/vPvB assessment not available as chemical safety assessment not required/not conducted

12.6 Other adverse effects

An environmental hazard cannot be excluded in the event of unprofessional handling or disposal. Very toxic to aquatic life with long lasting effects.

no data available

13. DISPOSAL CONSIDERATIONS

13.1 Waste treatment methods

Product

Offer surplus and non-recyclable solutions to a licensed disposal company.

Contaminated packaging

Dispose of as unused product.

14. TRANSPORT INFORMATION

DOT (US)

Not dangerous goods

IMDG

UN number: 3082 Class: 9 Packing group: III EMS-No: F-A, S-F

Proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Diisodecyl phthalate) Marine pollutant: Marine pollutant

IATA

 

 

UN number: 3082

Class: 9

Packing group: III

Proper shipping name: Environmentally hazardous substance, liquid, n.o.s. (Diisodecyl phthalate)

Further information

EHS-Mark required (ADR 2.2.9.1.10, IMDG code 2.10.3) for single packagings and combination packagings containing inner packagings with Dangerous Goods > 5L for liquids or > 5kg for solids.

15. REGULATORY INFORMATION

SARA 302 Components

SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.

SARA 313 Components

SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.

SARA 311/312 Hazards

No SARA Hazards

Massachusetts Right To Know Components

No components are subject to the Massachusetts Right to Know Act.

Pennsylvania Right To Know Components

 

CAS-No.

Revision Date

15. REGULATORY INFORMATION cont' d

 

 

Diisodecyl phthalate

26761-40-0

2009-07-17

New Jersey Right To Know Components

 

 

 

CAS-No.

Revision Date

Diisodecyl phthalate

26761-40-0

2009-07-17

California Prop. 65 Components

 

 

WARNING: This product contains a chemical known to the

CAS-No.

Revision Date

State of California to cause birth defects or other reproductive

26761-40-0

2007-09-28

harm.

 

 

Diisodecyl phthalate

 

 

16. OTHER INFORMATION

Full text of H-Statements referred to under sections 2 and 3.

H400

Very toxic to aquatic life.

H410

Very toxic to aquatic life with long lasting effects.

HMIS Rating

 

Health hazard:

0

Chronic Health Hazard:

Flammability:

1

Physical Hazard

0

NFPA Rating

 

Health hazard:

0

Fire Hazard:

1

Reactivity Hazard:

0

Further information

The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. Continental Industries Group, Inc. shall not be held liable for any damage resulting from handling or from contact with the above product.